TPS Aqua-CPA Manual Download Page 1 | Manualshive

Page: 1 / 38

TPS Aqua-CPA Manual Download Page 1

Congratulations

!

You have purchased the latest in Handheld Conductivity-TDS-Salinity-
pH-Temperature instrumentation. We trust that your new

Aqua-CPA

will

give you many years of reliable service.

The

Aqua-CPA

is a breeze to operate. This manual has been designed

to help you get started, and also contains some handy application tips. If
at any stage you require assistance, please contact either your local
TPS representative or the TPS factory in Brisbane.

The manual is divided into the following sections:

1.

Table of Contents

Each major section of the handbook is clearly listed. Sub-sections
have also been included to enable you to find the information you
need at a glance.

2.

Introduction

The introduction has a diagram and explanation of the display and
controls of the

Aqua-CPA

. It also contains a full listing of all of the

items that you should have received with your

Aqua-CPA

. Please

take the time to read this section, as it explains some of items that
are mentioned in subsequent sections.

3.

Main Section

The main section of the handbook provides complete details of the

Aqua-CPA

, including operating modes, calibration, troubleshooting,

specifications, and warranty terms.

4.

Appendices

Appendices containing background information and application notes
are provided at the back of this manual.

Model Aqua-CPA

Cond, TDS, Salinity,

pH, Temp. Meter

Version

: 2.0

Date

: 20/09/2011

1
2
3
...
»

Summary of Contents for Aqua-CPA







































Reviews:

No comments