7.
Press
F1
(EXIT) to leave the Trigger menu, then
ENTER
. Now press
Ch B
. The following
menu should result.
8.
The previous screen shows the Channel B available selections. Click through the
sequence until you get to 1mV/Psi. Then finish the other selections and click
ENTER
. -
Check that the display shows Psi units at the top left of the screen. This is a spot check
on the sequence of one of the lists in this menu. You may choose to do this for the other
lists too (i.e.:ACA, DCA, etc.).
9.
Press
ENTER
to exit with your selections from the previous screen, the press
Ch A.
The
result should show the selections available specific to Channel A, as depicted in the
following screen.
460 User’s Guide
Test and Calibration
A-4
