6
6. WIRING DIAGRAM
DOUBLE SPEED SWITCH WIRING DIAGRAM
C
2
THERMAL CUT-OUT
GREEN
WHITE
YELLOW
BLACK
3
BLUE
ORANGE
(YELLOW)
1
L
OFF
Hi
K
Lo
N
7. OPERATING INSTRUCTIONS
7.1 Connect power to the unit.
7.2 Push the power switch to the left/right to switch on the unit. [L] - Low speed, [H] - High speed.
7.3 Adjust the air deflector to obtain optimum effect.
8. MAINTENANCE AND CLEANING
WARNING:
A. Any service is to be performed only by qualified personnel who are familiar with local
codes and regulations and are experienced with this type of product.
B. Always unplug or disconnect the appliance from the power supply before servicing or
cleaning the unit.
C. Never use petrol, benzene, thinners or any other such chemicals for cleaning the unit.
D.
Don’t allow water or any liquid to enter the motor.
8.1. Routine maintenance must be done every year.
8.2. Plastic parts should be cleaned with mild soap water, thoroughly remove soap film with a
clean damp cloth.
8.3. Wipe the exterior surfaces of the fan with a moistened cloth with a solution of mild detergent
and water.
8.4. Dry the case with a soft dry cloth before operating the unit.
