background image

10

 

 

Tracker Mode 
The 775 can also be used to Track/Trace a combustible gas leak by 
using the following method:- 
 

1.  Adjust the TICK ADJUST by moving the thumb wheel in 

an anti-clockwise direction until a uniform ticking sound 
is heard. 

 

2.  Approach the suspected leak area with the combustible 

leak sensor until the tick begins to increase. When the tick 
increases DO NOT move the sensor from the area but re-
adjust the TICK ADJUST by moving the thumb wheel 
back in a clockwise direction till the slower uniform tick-
ing sound is heard again. 

 

3.  Repeat step 2 until leak is found. 

4.  If the tick stops, the concentration level has decreased. 

Move back in the opposite direction to find the leak again.  

7

 

 

 

 
Automatically Zeroes sensors to the air/environment you are in. 

NOTE- Always turn instrument on in clean air 
 

.  
 

 

Automatically tests the Combustible Gas leak sensor 
 
 
 
 
The instrument is now ready for use and the following screen 
will be displayed:- 
 

 

10

 

 

Tracker Mode 
The 775 can also be used to Track/Trace a combustible gas leak by 
using the following method:- 
 

1.  Adjust the TICK ADJUST by moving the thumb wheel in 

an anti-clockwise direction until a uniform ticking sound 
is heard. 

 

2.  Approach the suspected leak area with the combustible 

leak sensor until the tick begins to increase. When the tick 
increases DO NOT move the sensor from the area but re-
adjust the TICK ADJUST by moving the thumb wheel 
back in a clockwise direction till the slower uniform tick-
ing sound is heard again. 

 

3.  Repeat step 2 until leak is found. 

4.  If the tick stops, the concentration level has decreased. 

Move back in the opposite direction to find the leak again.  

7

 

 

 

 
Automatically Zeroes sensors to the air/environment you are in. 

NOTE- Always turn instrument on in clean air 
 

.  
 

 

Automatically tests the Combustible Gas leak sensor 
 
 
 
 
The instrument is now ready for use and the following screen 
will be displayed:- 
 

 

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for 775
















Reviews: