INSTALLATION INSTRUCTIONS
DISCONNECT SWITCH
CAUTION: Disconnect supply service to avoid electrical shock. All wiring must conform
to nation electric code and all local codes having jurisdiction.
NOTES:
*
Do not eliminate or bypass the thermal cutout.
*
Do not exceed the name plate rating.
*
The in-built accessory can be mounted in either end of baseboard.
1. Remove junction box cover, retain screw.
2. Remove wire nut in junction box (Do not disturb the crimp nut connection).
3. Make connections per wiring diagram. Connect red lead wires to line supply and black
lead wires to load.
4. Install disconnect switch cover assembly to baseboard junction box and secure with
screw previously removed.
5. Restore power and check for proper operation.
FORM: 9934
