TPE Di4000 Manual Download Page 20

If the tool has been operated on a supply voltage other than that specified on the tool.

If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.

Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
The warranty excludes damage resulting from product misuse or product neglect.

• 
• 

This warranty is given by TPE Australia Pty Ltd

 

ABN: 98 116427 591

Ph: 

+61

4 56422515

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF 

PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL 

AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY 

OR PROCEDURE.

WARRANTY

 

 

1 year or 100 Hours whichever comes first

Your product is guaranteed for a period of 

12 months from the original date of purchase

.

 

If a product is defective it will be repaired in accordance with the terms of this warranty.

 

Warranty excludes consumable parts, for example: wheels, bearings.

The benefits provided under this warranty are in addition to other rights and remedies which

 

are available to you under law. The warranty covers manufacturer defects in materials, 

workmanship and finish under normal use.  
Our goods come with guarantees that cannot be excluded under Australian Consumer law . 

You are entitled to a replacement or refund for a major failure and to compensation for other 

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired and 

replaced if the goods fail to be of acceptable quality and the failure does not amount to a 

major failure.  

WARRANTY EXCLUSIONS

The following actions will result in the warranty being void.

`

Australia 

+61

456422515

WARRANTY

YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A 

CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST 

BUNNINGS WAREHOUSE (see www.bunnings.com.au  for store locations) WITH YOUR 

BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY 

PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:   

20

Summary of Contents for Di4000





















Reviews: