NOTE 1: AC breaker panel protection is recommended when using data protection. Data protection diverts or dumps excess energy from
data lines into the power grounding system. The protected device/equipment should also have AC protection because it is still vulnerable
to transients on or from the power lines. Omitting AC protection poses a continued threat of failure and lockup at the communication
interface. By strategically protecting branch breaker panels with the TTLP, surge events will once again be equalized and safely contained
at the breaker panel.
INSTALLATION CONTINUED
Din Rail or
Screw Down
Mountable
Tabs slide out for
screw down
mounting.
Equipment
Power
Outlet
3
Breaker
Panel
1
Incoming
Utility Power
Meter
Box
Facility
AC Power
Ground
Protect all copper
wires entering or
leaving the facility.
Ground to AC
ground feeding
equipment in order
to divert and allow
for a low resistance
surge pathway
around the
equipment.
Transient Protection Design
#1
TK
-
TTLP
-
1S240
-
FL
#2
TPD
-
24SLP2 (for 2 wire 24 volt system)
#3
TPD
-
GRD
© 2017 Transient Protection Design. All Rights Reserved. This document is the
property of Transient Protection Design.
Transient Protection Design,
4311 William Penn Highway, Mifflintown, PA 17059
Call Technical Support at 717
-
436
-
2856 or visit us at
www.TransientProtectionDesign.com
