14
www.tpcdental.com
delivery head leveling and tilt adjustments
4.
If you need to level the unit head or adjust the tilt use the following adjustments.
•
Loosen the 4 Allen screws that attach the unit head to the short control arm. See
image. Once the screws are loose, use the two adjustment screws in the center on
each side to level the head.
•
To adjust the unit head tilt, remove the flex arm end cap closest to the delivery
unit head. Loosen the stop nut, and using an Allen wrench turn the adjustment
screw clockwise to increase the tilt of the delivery unit head. Turn the adjustment
screw counter clockwise decrease the tilt.
*Stop Nut
*Adjustment Screw
