TPC L700 Lucent Dental Light, Operation And Service Manual

Page: 7 / 14

7
Light head adjustment
•
If you experience a downward drift with your operatory light head please follow the
procedure below.
•
Tighten both set screws on the back side of the operatory light. There is one located on
each side of the dental light head. Reference image below. To tighten the set screw turn
it clockwise. Do not over tighten the set screw as damage may occur.
Vertical Arm adjustment
•
If you experience a downward drift with your operatory lights vertical arm please follow
the producer below.
•
With one hand lower the vertical arm till you see the adjustment. See image below.
Adjust the inner nut till the desired tension is achieved.
Less tension More tension
Turn tension nut counter
clockwise if vertical light
arm drifts up.
Turn tension nut
clockwise if vertical light
arm drifts down.