Figure 4-2
Note:
.
Use the paper specified;
.
Paper width:57_58mm; . Max diameter<1>: 50mm;
Figure 4-3
5. Replace the ribbon
cassette
UP-PN printers have a ribbon cassette loaded at ex-factory but cassette needs to replace since it has been used for a period of time.
The replacing steps is described as follow:
.
Open the upper cover of the printer
.
Take out the old cassette
Push the button mark with "push" (refer to figure 5- I) and take out
the cassette
.
Insert a new cassette
a. Press the knob of the cassette and turn it at the direction shown by
the arrow till the ribbon is tight; b. Put the end mark with the "PUSH" to the corresponding position;
c Put the end which with the knob on the axle of the gear. Make sure the end fall to the axle completely, if not turn the knob to
adjust it.
5
