103
Chapter 6
Events and Alerts
6. 6 Offline and IP Conflict
Alarm actions will be triggered when the NVR is offline or it detects IP conflict between the NVR and
other devices in the local network. You can select triggered actions for these two exception types.
Follow the steps below to finish the configuration.
1. Right click on the Live View screen and click
Settings
in the pop-up main menu, then go to
Event
>
Exception Detection
>
Offline and IP Conflict
.
2. Select the alarm actions according to your needs:
Screen Prompt
A warning sign
in the lower right corner of the monitor screen. Enable
it to check the event type and time.
Buzzer
The buzzer on the NVR will beep when NVR is offline or IP conflict is
detected.
3. Click
Save
to save the settings.
