or
2
Use Your Camera with an NVR
VIGI NVR
Monitor
Network Device
(e.g., Switch or Router)
Network Camera
Network Camera
The camera works with an NVR for easier batch access and management.
*Here we use a VIGI NVR as an example.
Frequently Asked Questions (FAQ)
Q1: What can I do if no cameras are discovered?
• Refresh to discover your camera again.
• Make sure the camera is powered on.
• Make sure your camera and NVR/computer are in the same
subnet. If not, use the
VIGI Security Manager
to set
camera’s network parameters.
• Try to add your camera manually.
• For other NVR brands, make sure you have activated the
camera by setting a password via the
VIGI Security
Manager
or
TP-Link VIGI
app.
Q2: How do I know the camera is powered on?
• The IR LED will turn on for 20 seconds once the camera is
powered on. If it’s off, you can cover the lens for several
seconds and check if the IR LED turns on.
• Check the LED status of the network device your camera is
connected to.
For more questions, please refer to
https://www.tp-link.com/support/faq/2850/
©2021 TP
-Link 7106509117 RE
V2.0.0
Step 2. Power On the Cameras
Power on your cameras with the PoE power supply or an
external power supply.
Note: The camera’s standard power supply is 12V DC or PoE (802.3af/at).
The power source should meet LPS, PS2, and other requirements according
to IEC 62368-1.
Step 1. Connect the Hardware
Connect your cameras to the same network as your NVR
(as shown above).
Step 3. Add Cameras with the NVR
Before you start, make sure your NVR is working properly.
1. Right click on the Live View screen, and click
Add Camera
.
2. Select your camera and click
+
to add your camera directly.
If you have disabled Plug and Play on your NVR, create a
password or use a preset password for your camera.
Note: If you can’t find your camera, refer to FAQ-Q1.
Done!
You can now view live video and manage cameras.
Method 2: Via the VIGI App
1. Dow
nload and install the
TP-Link VIGI
app.
2. Open the
TP-Link VIGI
app and log in with your TP-Link ID. If you don’t
have an account, sign up first.
3. Tap the
+
button on the top right and follow the app instructions to
activate and add your cameras.
More Management Methods
1. Download the
VIGI Security Manager
on your computer at
https://www.tp-link.com/support/download/vigi-security-manager/
.
2. Install the
VIGI Security Manager
and open it.
3. Cameras on the same network as your computer can be automatically
discovered. Go to
Settings
>
Discovered Devices
, click
+ Add
to
activate your discovered cameras by setting passwords, and follow
the instructions to add your cameras.
Method 1: Via the VIGI Security Manager (Windows only)
You can also access and manage your cameras via any of the methods below.
View live video and modify camera settings on your computer.
Remotely view live video, manage cameras, and get instant alerts.
Using your cameras with other NVR brands:
Step 1:
Power on your cameras and connect them to the network.
Step 2:
Activate the cameras using the
VIGI Security Manager
or
TP-Link VIGI
app (refer to the next section).
Step 3:
Refer to the NVR’s User Manual to add cameras.
• Do not use any other chargers than those recommended.
• Do not use damaged charger or USB cable to charge the device.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Keep the device away from water, fire, humidity or hot environments.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce
For technical support, replacement services, user guides, and more information,
please visit
https://www.tp-link.com/support
, or simply scan the QR code.
If you have any suggestions or needs for the product guides,
you are welcome to email
