79
Chapter 5
Configure the Router as an Access Point
•
Disable Wireless Security
- The wireless security function can be enabled or disabled.
If disabled, wireless clients can connect to the router without a password. It’s strongly
recommended to choose one of the following modes to enable security.
•
WPA-PSK/WPA2-Personal
- It’s the WPA/WPA2 authentication type based on pre-
shared passphrase.
•
Version
- Select
Automatic
,
WPA-PSK
or
WPA2-PSK
.
•
Encryption
- Select
Automatic
,
TKIP
or
AES
.
•
Wireless Password
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
•
Group Key Update Period
- Specify the group key update interval in seconds.
The value can be 0 or at least 30. Enter 0 to disable the update.
•
WPA /WPA2-Enterprise
- It’s based on Radius Server.
•
Version
- Select
Automatic
,
WPA
or
WPA2
.
•
Encryption
- Select
Automatic
,
TKIP
or
AES
.
•
Radius Server IP
- Enter the IP address of the Radius server.
•
Radius Port
- Enter the port that Radius server used.
•
Radius Password
- Enter the password for the Radius server.
