61
Chapter 4
Configure the Router in Wireless Router Mode
It is strongly recommended that you change the default username and password of the
router, for all users that try to access the router’s web-based utility or Quick Setup will
be prompted for the router’s username and password.
Note:
The new username and password must not exceed 15 characters and not include any spacing.
3. Click
Save
.
4. 16. 8. Local Management
This feature allows you to block computers on the LAN from accessing the router by
using the MAC/IP-based authentication.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
System Tools
>
Administrator
, and focus on the
Service Configuration
section.
• Allow all LAN conencted devices to manage the router locally
1. Keep the
Available Host (IP/MAC)
empty, which means you don’t specify any host to
manage the router.
2. If you want to access the router via both HTTPS and HTTP, please tick the
Enable
checkbox
in
HTTPS Service
column. Otherwise, keep it disbled.
3. Keep the local management port as default if you don’t know which port to use.
4. Click
Save
.
Note:
If the web management port conflicts with the one used for
Virtual Server
entry, the entry will be automatically disabled
after the setting is saved.
Downloaded from