98
Chapter 5
Configure the Router in WISP Mode (Hotspot Mode)
3 ) Click
Save
.
5.
Go to
Access Control
>
Rule
and add a new access control rule.
1 ) Click
Add New
.
2 ) Give a name for the rule in the
Description
field. Select
host_1
from the LAN host
drop-down list; select
target_1
from the target drop-down list; select
schedule_1
from the schedule drop-down list.
3 ) Leave the status as
Enabled
as click
Save
.
Note:
When
Target
is set to be
URL Address
mode, the
Direction
field is
OUT
and not editable, which means
the host can only visit or is not allowed to visit the URL address you set.
6.
Select
Enable Internet Access Control
to enable Access Control function.
7.
Select
Allow the packets specified by any enabled access control policy to pass
through the Router
as the default filter policy and click
Save
.
Downloaded from