TP-Link TL-WR1043N, Fiber Setup Manual

Page: 5 / 11

Page | 4
3 Back Panel

POWER :
The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this TL-WR1043ND Wireless N Gigabit Router.

RESET :
There are two ways to reset to the Router's factory defaults:
1. Use the Factory Defaults function on System Tools -> Factory Defaults page in
the Router's Web-based Utility.
2. Use the Factory Default Reset button: Press the Reset button for five seconds
and then wait for the Router to reboot.

USB :
Connect with USB Mass Storage Device.

WAN :
This WAN port is where you will connect the DSL/cable Modem, or Ethernet.

1,2,3,4 (LAN) :
These ports (1, 2, 3, 4) connect the Router to the local PC(s).

Wireless antenna :
To receive and transmit the wireless data.