background image

TL-WN951N 

300Mbps Wireless N PCI Adapter 

 

 

2

Chapter 1  Product Overview 

Thank you for choosing the TL-WN951N 300Mbps Wireless N PCI Adapter. 

1.1  Introduction 

The adapter is a 802.11n client device designed to deliver a high-speed and unrivaled wireless 

performance for your desktop. With a faster wireless connection, you can get a better Internet 

experience, such as downloading, gaming, video streaming. 

With the 802.11n technology, higher throughput improvements using MIMO (multiple input, 
multiple output antennas), the TL-WN951N’s auto-sensing capability allows high packet transfer 
rate of up to 300Mbps for maximum throughput. It has good capability on anti-jamming, and it can 
also interoperate with other wireless (802.11b) products. The adapter supports WEP, WPA and 
WPA2 encryption to prevent outside intrusion and protect your personal information from being 
exposed. 

The adapter is easy to install and manage with the Quick Setup Wizard guiding you step-by-step 

through the installation process and the TP-LINK Wireless Configuration Utility instructing you to 

quickly set up a wireless connection. 

With unmatched wireless performance, reception, and security protection, the TL-WN951N is the 
best choice for easily adding or upgrading wireless connectivity to your desktop. 

1.2  Features 

¾

  Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards 

¾

  Supports WPA/WPA2 data security, TKIP/AES encryption 

¾

  Supports high rate of up to 300Mbps for maximum throughput, supports automatically 

adjust to lower speeds due to distance or other operating limitations 

¾

  Provides 32-bit PCI interface 

¾

  Supports Ad Hoc and Infrastructure modes 

¾

  Good capability on anti-jamming 

¾

  Supports roaming between access points when configured under Infrastructure mode 

¾

  Easy to configure and provides monitoring information 

¾

  Supports Windows XP, Windows Vista and Windows 7 

¾

  Three antennas which are listed in a format of 3x3 for three receivers and three 

transmitters 

 

 

 

 

 

Summary of Contents for TL-WN951N - IEEE 802.11b/g 802.11n Draft 2.0 PCI Wireless Adapter










































Reviews: