Verify Successful Setup
6) Use an Ethernet cable to connect a computer to any unused yellow ‘LAN’ port of the
router you would like to verify has been successfully setup
7) Please note the node identifier which is a unique single digit number clearly marked on
the underside of the router
8) Open a web browser and visit the IP address of the connected router. These are
http://192.168.3.1 if connecting to node identifier 1, http://192.168.3.2 if connecting to
node identifier 2 etc…
9) When prompted for sign in credentials , please input the following:
Username:
admin
Password:
Bonding123
(
we recommend that you change this password
)
10) In the menu positioned at the left of the displayed web page, select ‘Status’
11) If this router has been successfully setup, items within the ‘Service Status’ panel will be
displayed green in colour and report as follows:
For information, the above listed items make the following checks:
Modem Connection Status -
connection through your ISP
Aggregation Server Status
-
connection to our data centre
Routing Mode
-
method by which router is able to communicate:
WAN and Community:
This router is connected to the aggregation server directly and
at least 1 other Sharedband router in its community
WAN Only:
This router is not connected to other routers in its community (see step 2
to resolve)
Community Only:
This router is not connected to the aggregation server directly (see
page 4 for assistance)
No network available
: This router is not connected to the Sharedband aggregation
server and other routers in its community (see page 4 for assistance)
12) Repeat above steps 6-11 for all of the remaining routers in the community
TP-Link TL-WDR3600
3
www.sharedband.com
