TP-Link TL-WA830RE User Manual Download Page 48

Page: 48 / 65

TL-WA830RE

300Mbps Wireless N Range Extender User Guide

4.7 System Tools

System Tools

option helps you to optimize the configuration of your device. SNMP can help you

to manage the device locally or remotely with specified software. The diagnostic tools (Ping and

Traceroute) allow you to check the connections of your network components. You can upgrade

the Range Extender to the latest version of firmware as well as backup or restore the Range

Extender’s configuration files. Ping Watch Dog can help to continuously monitor a particular

connection to a remote host. It’s suggested that you change the default password to a more

secure one because it controls access to the device’s web-based management page. Besides,

you can find out what happened to the system in System Log.
There are nine submenus under the

System Tools

menu (shown as Figure 4-27):

SNMP

Diagnostic

Ping Watch Dog

Firmware Upgrade

Factory Defaults

Backup & Restore

Reboot

Password

and

System Log

Clicking any of them will enable you to configure the

corresponding function. The detailed explanations for each submenu are provided below.

Figure 4-27 The System Tools menu

4.7.1 SNMP

Selecting

System Tools

SNMP

to enable this function will allow the network management

station to retrieve statistics and status from the SNMP agent in this device. Simple Network

Management Protocol (SNMP) is a popular network monitoring and management protocol, used to

refer to a collection of specifications for network management that include the protocol itself. To

use this function, select Enable and enter the following parameters in Figure 4-28.

Summary of Contents for TL-WA830RE


































































Search results

Summary of Contents for TL-WA830RE

Reviews:

Related manuals for TL-WA830RE

Brands by name

Popular brands

TP-Link TL-WA830RE, User Manual

Search results

Summary of Contents for TL-WA830RE

Reviews:

Related manuals for TL-WA830RE

Brands by name

Popular brands