background image

 

 

2

¾

  4K entry MAC address table of the TL-SG1008D with auto-learning and auto-aging 

¾

  Support for Jumbo frames of up to 9728 Bytes 

¾

  LED indicators for monitoring power, link, speed and activity 

¾

  External power adapter supply 

Chapter 2.  Installation 

2.1  Mounting the Switch on a Desk 

To install the Switch, please follow the steps: 

1)  You can place the Switch on a flat desk. 

2)  Please inspect the Power Adapter carefully and make sure that it is properly connected to a 

power source. 

3)  Ensure adequate ventilation space around the switch for dissipating heat and air.   

)

 

Note:

 

Please avoid any heavy thing placed on the switch. 

2.2 Power On

 

TL-SG1008D 8-port Gigabit Desktop Switch can be used with AC power supply. Powering on the 

Switch, it will automatically initialize and its LED indicators will respond as follows: 

1)  All the 10/100Mbps and 1000Mbps Link/Act LED indicators will light simultaneously at first, 

then light in turn and the 10/100Mbps Link/Act LED indicators will light simultaneously again 

for the last time, which indicates the system initialized well. 

2)  The Power indicator will light all the time. 

)

 

Note:

 

If the LED indicators don’t respond as described above, please check the power supply and its 

connection. 

 

 

 

 

 

Summary of Contents for TL-SG1008D - Switch











Reviews: