Figure 3-2 TL-SF1024 Switch Rear Panel sketch
3.3 LED indicators
The LED indicators include Power, Link/Act LED indicators, which are used
for monitoring and pre-troubleshooting of the Switch. The following section
shows the LED indicators of the Switch along with an explanation of each
indicator.
Figure 3-3 TL-SF1024 Switch LEDs sketch
Ø
Power LED
: This indicator will light solid red when the Switch powers
up. If the LED is not lit, please check the power supply and connection.
Ø
LINK/ACT LED
: The LED indicates Link/Active status. The
corresponding LED indicator will light solid green when connected to a
network device. It flashes green when data is being transmitted or
received on the working connection.
Ø
100Mbps
:
The corresponding gigabit port LED indicator will light solid
green when it's working on 100Mbps speed, not lit when working on
10Mbps speed.
Note
: Because of the difference of among the mode of switch,Some
switch don't include the 100Mbps indicator,such as TL-SF1048 and a
few of TL-SF1016 switch.
TL-SF1016/TL-SF1024/TL-SF1048
10/100M Fast Ethernet Switch User's Guide
TL-SF1016/TL-SF1024/TL-SF1048
10/100M Fast Ethernet Switch User's Guide
Power
Link
Act
100Mbps
100Mbps
1
3
5
7
9
11 13 15 17 19
21 23
2
4
6
8
10
12
14
16
18
20
22
24
Link
Act
TL-SF1024
10/100Mbps Fast Ethernet Switch
100-240V
~
50-60Hz 0.6A
2.3 Power on
The TL-SF1016/TL-SF1024/TL-SF1048 16/24/48-port 10/100M Switch is
powered by an AC Power Supply. Connect the Switch and power outlet by
power cord. Powering on the Switch, it will be automatically initialized and the
LED indicators should respond as follows:
1)
All of the LED indicators will flash momentarily for one second, which
represent a resetting of the system.
2)
The Power LED indicator will light up.
Chapter 3: Identifying External Components
This Chapter describes the front panel, rear panel and LED indicators of the
Switch.
3.1 Front Panel
The front panel of TL-SF1024 consists of switch model, switch LED indicators,
and 24 10/100Mbps RJ-45 ports.
Figure 3-1 TL-SF1024 Switch Front Panel sketch
3.2 Rear Panel
The rear panel of TL-SF1024 only features an electrical outlet, which is an AC
electrical outlet. Connect the female of the power cord head here, and the
male head to the AC power.
Power
Link
Act
100Mbps
100Mbps
1
3
5
7
9
11 13 15 17 19
21 23
2
4
6
8
10
12
14
16
18
20
22
24
1
3
5
7
9
11
13
15
17
19
21
23
2
4
6
8
10
12
14
16
18
20
22
24
Link
Act
TL-SF1024
10/100Mbps Fast Ethernet Switch
4
5
