TP-Link TL-SC2020N User Manual Download Page 13

Page: 13 / 53



Solid Blue:

The Camera has been connected to a network.

Built-in Microphone

: The location where the voice from your partner comes out.

2.3.2 Rear View

Power Jack

LAN Port

WPS LED Indicator

RESET Button

WPS Button

Base Plate



Power Jack

: The power connector is where you connect the power adapter.

RESET

Press the button for more than 15 seconds, and the Camera will be restored to factory

defaults.



LAN Port

: Through this port, you can connect the Camera to your computer or the other Ethernet

network devices.



WPS (Wi-Fi Protected Setup)

: This button is used to easily set up a wireless connection with the

Router supporting WPS.

Step 1

. Press the WPS button on the router supporting WPS for 2 seconds.

Step 2

. Within 2 minutes, press the WPS button on the Camera for 2 seconds.



Lock Ring

: It is used to adjust the angle of the Camera.



Base Plate

: It is used to support the Camera and can be fixed to a flat surface with the supplied

screws.

Summary of Contents for TL-SC2020N






















































Search results

Summary of Contents for TL-SC2020N

Reviews:

Related manuals for TL-SC2020N

Brands by name

Popular brands

TP-Link TL-SC2020N, User Manual

Search results

Summary of Contents for TL-SC2020N

Reviews:

Related manuals for TL-SC2020N

Brands by name

Popular brands