User Guide
56
Rule Unmatched:
If the current rule can not match, and you select
Forward
, the modem
router will skip the rule and transmit directly.
If you select
Next
, the modem router will find
the next filter rule (show in Filter list) to match.
IP/MAC Filter Listing:
This displays the information about the MAC Filter rules.
To add a MAC Address filtering entry:
For example:
If you want to block the PCs with MAC addresses 00:0A:EB:00:07:BE and
00:0A:EB:00:07:5F to access the Internet, you can configure as follows. Presume the rules are
both aimed at the interface PVC0, and their indexes are (1, 1) and (1, 2).
Step 1:
Select
IP/MAC Filter
as the Filter Type Selection.
Select the
MAC
as the Rule Type on the Filter screen, then you can configure the
specific rule for the example.
Step 2:
Select the
IP/MAC Filter Set Index
and
IP/MAC Filter Rule Index
for the rule, then
select the Interface
PVC0
, and select the Direction
Outgoing
for the first rule.
Note:
If you want to make the rule take effect, please select
Yes
to active the rule.
Step 3:
Enter the
MAC
Address
and select the Unmatched rule as
Next
.
Step 4:
Finally, click
SAVE
to save the entry.
Step 5:
Go to Step 2 to configure the next rule: Block the PC with MAC address
00:0A:EB:00:07:BE to access the Internet.
Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You
can enter the
IP / MAC Filter Set Index
to view the information about the rule.
