User Guide
54
Select
IP
as the Rule Type on the Filter screen, then you can configure the specific
rule for the example.
Step 2:
Select
IP/MAC Filter Set Index
and
IP/MAC Filter Rule Index
for the rule, then select
the Interface
PVC0
, and select the Direction
Both
for the first rule.
Note:
If you want to make the rule take effect, please select
Yes
to active the rule.
Step 3:
Enter the
Source IP Address
,
Destination IP Address
,
Subnet Mask
and
Port Number
in the corresponding field.
Step 4:
Select the Protocol as
TCP
and select the Unmatched rule as
Next
.
Step 5:
Finally, click
SAVE
to save the entry.
Step 6:
Go to Step 2 to configure the next two rules: Block E-mail received by the IP address
192.168.1.7 on your local network; Make the PC with IP address 192.168.1.8 unable to
visit the website of IP address 202.96.134.12.
Note:
After you complete the IP filter rules for the example, the Filter list will show as follows. You can
enter the
IP / MAC Filter Set Index
to view the information about the rule.
