TD-W8951ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
32
disable the function, please click
Disable
.
¾
MLD Proxy:
The MLD (Multicast Listener Discovery Protocol) Proxy function is enabled by
default. If you want to disable the function, please click
Disable
.
¾
Dual Stack Lite:
Enable the Dual Stack Lite (D-S Lite) function if you need. It is disabled by
default.
4) Bridge
Mode
If you select this type of connection, the modem router can be configured to act as a bridging
device between your LAN and your ISP. Bridges are devices that enable two or more networks to
communicate as if they are two segments of the same physical LAN.
¾
Dual Stack Lite:
Enable the Dual Stack Lite (D-S Lite) function if you need. It is disabled by
default.
Figure 4-14
)
Note:
After you finish the Internet configuration, please click SAVE to make the settings take effect.
4.3.1.3 IPv4/IPv6
If you select
IPv4/IPv6
as IP version, please follow both the
4.3.1.1 IPv4
and
4.3.1.2 IPv6
configuration based on different connection types to configure the parameters for WAN ports.
4.3.2 LAN
Choose “
Interface Setup
→
LAN
” menu, and you will see the LAN screen (shown in Figure 4-15).
Please configure the parameters for LAN ports according to the descriptions below.
