TD-W8951ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
27
Figure 4-9
¾
Service name:
Specify a name for the PPPoA/PPPoE connection for recognition.
¾
Username:
Enter your username for your PPPoA/PPPoE connection to identify and verify
your account to the ISP.
¾
Password:
Enter your password for your PPPoA/PPPoE connection.
¾
Encapsulation:
For both PPPoA/PPPoE connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
¾
Bridge Interface:
Activate the option, the modem router can also work in Bridge mode.
¾
Connection:
For PPPoA/PPPoE connection, you can select
Always on
or
Connect
on-Demand
or
Connect Manually
. Connect on demand is dependent on the traffic. If there is
no traffic (or
Idle
) for a pre-specified period of time, the connection will drop down
automatically. And once there is traffic send or receive, the connection will be automatically
on.
¾
Default Route:
You should select
Yes
to configure the PVC as the default gateway to
Internet from this device.
¾
Static/Dynamic IP Address:
For PPPoA/PPPoE connection, you need to specify the public
IP address for this ADSL modem router. The IP address can be either dynamically (via DHCP)
or given by your ISP. For Static IP, you need to specify the IP address, Subnet Mask and
Gateway IP address.
