TD-W8901GB
54M Wireless ADSL2+ Modem Router User Guide
23
used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your
PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
Please enter the information accordingly.
Figure 4-9
¾
Servicename:
Enter a name to mark current connection, or you can leave it blank.
¾
Username:
Enter your username for your PPPoE/PPPoA connection.
¾
Password:
Enter your password for your PPPoE/PPPoA connection.
¾
Encapsulation:
For both PPPoE/PPPoA connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
¾
Bridge Interface:
Activate the option, and the Router can also work in Bridge mode.
¾
Connection:
For PPPoE/PPPoA connection, you can select
Always on
or
Connect
on-Demand
or
Connect Manually
. Connect on demand is dependent on the traffic. If there
is no traffic (or
Idle
) for a pre-specified period of time), the connection will tear down
