16
Chapter 3
1. Connect to the powerline extender wirelessly. Visit
http://tplinkplc.net
, and log
in with the password you set for the extender.
2. Go to
Wi-Fi
>
Wi-Fi Clone
.
3. Select a Wi-Fi band or both to be cloned.
2.4GHz & 5GHz
is selected by default.
4. Before cloning, make sure your router supports the same band as your
extender. If you do not know how to check this, go to your router’s User Guide
for more information.
5. Plug your extender near your router.
6. Press the
WPS
button on your router.
WPS
WAN
LAN
Wireless Router
WPS
7. Within two minutes, press the
Wi-Fi
button on the side panel of the extender.
When the corresponding Wi-Fi LED blinks quickly for 3 seconds and then stays
on. It’s done!
3 5
Wireless Network
3 5 1
Customize Wireless Settings
The powerline extender’s wireless network name (SSID) and password, and
security option are preset in the factory. The preset SSID and password can be
found on the product label and Wi-Fi Info Card. You can customize the wireless
settings according to your needs.
