NC220
Day/Night Cloud Camera, 300Mbps Wi-Fi
Passive Mode:
Enabling passive mode may help you reach your FTP server if your camera is
behind a router protected by a firewall.
To set up a FTP to receive notification, follow the steps below:
1. Enter an IP address or domain of your FTP server, e.g. 192.168.1.168
2. Remain the FTP port number as the default value: 21.
3. Enter your username to log in to the FTP server, e.g. test.
4. Enter your password to log in to the FTP server.
5. Enter the path to the destination on the FTP server, e.g. /test
6. Enable
Passive Mode
.
7. Click
Save
to save and enable the settings.
Click
Test
, and a test JPEG snapshot will be sent to the specified FTP server to check whether
your settings are correct.
If the settings are tested correct, click
OK
.
If the settings are tested incorrect, check your network and FTP settings and try again later.
Select
, you can configure your camera to send snapshots to a specified E-mail address on
the following screen.
30