7
Step 1. Choose Location
Choose a location that avoids static and eases away from
splashing water. Find a clean, dry and smooth surface, then
wipe off the dust.
Note: Choose a location that avoids static and stays away from water splashing.
Step 2. Remove Adhesive Tape
Unplug the Light Strip first. Slowly peel away the 3M adhesive
backing and take it out bit by bit.
Note: Do not peel off the tape under the 3M adhesive backing.
Step 3. Stick Light Strip
Stick the light strip and press it down for 10-15 seconds.
Secure the controller with the adhesive pads. Do not move
it to other place after it is attached.
Step 4. Power Up Light Strip
Plug in the power adapter to power on your Light Strip.
INSTALL
LIGHT
STRIP
