51
Chapter 8
Customize Your Network
5.
Specify the IP address which will be reserved by the Controller.
6.
Select the
Enable This Entry
checkbox and click
OK
to make the settings effective.
8. 5. Configure IPv6 LAN Settings
Based on the IPv6 protocol, the Controller provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
8. 5. 1.
Configure the RADVD Address Type
1.
Visit
http://tplinkwifi.net
, and log in with the password you set for the Controller.
2.
Go to
Settings
>
Advanced Settings
>
DHCP Server
.
3.
Select
IPv6
to configure IPv6 LAN parameters.
4 ) Select the
RADVD
address type to make the router assign IPv6 address prefixes
to hosts.
Note:
Do not select the
Enable RDNSS
and
Enable ULA Prefix
check boxes unless required by your ISP. Otherwise
you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact
our technical support.
5 ) Keep
Site Prefix Type
as the default value
Delegated
. If your ISP has provided a
specific IPv6 site prefix, select
Static
and enter the prefix.
6 ) Keep
WAN Connection
as default.
4.
Click
Save
to make the settings effective.
