9
2.
Feed the Ethernet cable through
the mounting bracket. Insert the
enclosed screws and tighten them
with a Philips screwdriver to secure
the mounting bracket.
Notes:
1. Do not over tighten the screws.
2. If the enclosed screws do not fit the junction
box, use the screws attached to the junction box
instead.
3.
Connect the Ethernet cable to the
Ethernet port on the Deco.
4.
Orient the Deco LED according to
the image, attach the Deco to the
mounting bracket, then rotate it
clockwise until it locks into place.
Option 2: On a Wall Junction Box
The Deco can be mounted on a junction box. The junction box should
be pre-installed with a running-in-wall Ethernet cable. Ensure that the
mounting holes align to your junction box.
*Here the standard US wall junction box is used as an example.
C-hole
D-hole
D-hole
B-hole
1.
Detach the faceplate of the
junction box with a Phillips
screwdriver.
