Destination IP
Address:
Specify the IP address of the target host to which the Ping Watch
Dog Utility will send ping packets.
Ping Interval:
Enter the time interval (in seconds) between two successive ping
packets. The default value is 300 seconds.
Start-up Delay:
Enter the initial time delay (in seconds) from device startup to the
first ICMP echo requests sent by Ping Watch Dog. The default value
is 300 seconds.
The Start-up Delay value should be at least 60 seconds as the
device’s initialization takes a considerable amount of time.
Lost Packets Count:
Enter the fail count of ICMP echo request. If the device sends the
specified count of ICMP echo requests to the host and none of the
corresponding ICMP echo response packets is received, Ping
Watch Dog will reboot the device. The default value is 3.
29
