TP-Link AURANET EAP110-Outdoor, Installation Manual

Page: 14 / 16

To quickly set up a wireless network connection with mass EAPs,
please follow the steps below.
Note:
The IP address of the management host must be reachable for the EAPs in the
network. In this example, the management host is in the same LAN with the EAPs.
For More Configurations
Now you can manage your wireless network and view network
statistics using the EAP Controller. Please refer to the EAP
Controller User Guide to learn more information about
configuring and using the Controller software.
Step 1: Installing the EAP Controller
On the management host, download the EAP Controller
installation file from the product support page at
www.tp-link.com. Run the file and follow the wizard to install the
EAP Controller.
Step 2: Configuring the EAP Controller
Launch the EAP Controller and follow the configuration wizard to
create a primary wireless network. After the wizard is finished, a
login screen will appear. Enter the Admin name and password
you created and click Sign In .
Step 3: Adopting the EAP devices
Adopt the EAP devices in the Controller management interface
to change their status from Pending to Connected .
Software Configuration
11