8
Option 2: Wall Mounting
Step 4:
Connect the antennas to the EAP.
Step 1:
Place the mounting bracket in the
position you require. Mark three
positions for the screw holes .
Drill three 6mm (in diameter) holes
at the marked positions.
Step 2:
Insert the plastic wall anchors into
the 6mm holes. Align the bracket
to the plastic wall anchors and
drive the self-tapping screws into
the anchors through the bracket.
Step 3:
Align the mounting tabs on the
back of the EAP with the four slots
of the mounting bracket. Push and
slide the EAP downward until it
locks into place.
