5. Click
Save
to make the settings take effect. To check your Internet connection, click
Network Map
on the left of the page.
Note:
It may take 1-2 minutes to make the settings valid.
6. After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example.
Tips:
1. If you use
Dynamic IP
and
PPPoE
and you are provided any other parameters that are not required on the page, please go to
Advanced
>
Network
>
Internet
to complete the configuration.
2. If you still cannot connect to the Internet, refer to
4. 3. Setting Up an IPv6 Internet Connection
In this part, you can set up an IPv6 Internet connection if your ISP supports it and has provided related parameters.
