TP-Link Archer AX55 User Manual Download Page 9

Page: 9 / 122

Chapter 1

Get to Know About Your Router

Name

Status

Indication

(2.4 GHz Wireless)

The 2.4 GHz wireless band is enabled.

Off

The 2.4 GHz wireless band is disabled.

(5 GHz Wireless)

The 5 GHz wireless band is enabled.

Off

The 5 GHz wireless band is disabled.

(Internet)

Blue On

Internet service is available.

Orange On The router’s Internet port is connected, but the internet service

is not available.

Off

The router’s Internet port is unplugged.

(Ethernet)

At least one powered-on device is connected to the router’s

Ethernet port.

Off

No powered-on device is connected to the router’s Ethernet port.

(USB)

The inserted USB device is ready to use.

Blinking

A USB device is being identified.

Off

No device is plugged into the USB port.

1 2 2 Back Panel

The following parts (view from left to right) are located on the back panel.

Summary of Contents for Archer AX55



























































































































Search results

Summary of Contents for Archer AX55

Reviews:

Related manuals for Archer AX55

Brands by name

Popular brands

TP-Link Archer AX55, User Manual

Search results

Summary of Contents for Archer AX55

Reviews:

Related manuals for Archer AX55

Brands by name

Popular brands