TP-Link AC2600 MU-MIMO User Manual Download Page 77

Page: 77 / 107

Chapter 14

Manage the Router

4. Click

Start

to begin the diagnostics.

Tips:

Click

Advanced

, you can modify the ping count, ping packet size or the Traceroute Max TTL. It’s recommended to keep

the default value.

The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through

Ping

The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through

Traceroute

14. 3. Upgrade the Firmware

TP-Link aims at providing better network experience for users.
We will inform you throught the web management page if there’s any update firmware
available for your router. Also, the latest firmware will be released at the TP-Link official
website

www.tp-link.com

, and you can download it from the

Support

page for free.

Note:

• Backup your router configuration before firmware upgrade.
• Do NOT turn off the router during the firmware upgrade.

14. 3. 1. Online Upgrade

1. Visit

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for

the router.

2. When the latest firmware is available for your router, the update icon

will display

in the top-right corner of the page. Click the icon to go to the

Firmware Upgrade

page.

Summary of Contents for AC2600 MU-MIMO












































































































Search results

Summary of Contents for AC2600 MU-MIMO

Reviews:

Related manuals for AC2600 MU-MIMO

Brands by name

Popular brands

TP-Link AC2600 MU-MIMO, User Manual

Search results

Summary of Contents for AC2600 MU-MIMO

Reviews:

Related manuals for AC2600 MU-MIMO

Brands by name

Popular brands