TP-Link AC1350 Manual Download Page 9

Page: 9 / 114

Chapter 1

Get to Know About Your Router

Item

Description

Reset Button

Press and hold this button for about 5 seconds to reset the router to its
factory default settings.

Ethernet Ports (1/2/3/4)

For connecting your PC or other wired devices to the router.

Internet Port

For connecting to a DSL/Cable modem, or an Ethernet jack.

USB Port

For connecting to a USB storage device or a USB printer.

Power On/Off Button

Press this button to power on or off the router.

Power Port

For connecting the router to a power socket via the provided power adapter.

Wi-Fi Button

Press and hold the WiFi button for about 2 seconds to turn on or off the
wireless function of your router.

Antennas

Used for wireless operation and data transmit. Upright them for the best
Wi-Fi performance.

Summary of Contents for AC1350



















































































































Search results

Summary of Contents for AC1350

Reviews:

Related manuals for AC1350

Brands by name

Popular brands

TP-Link AC1350, Manual

Search results

Summary of Contents for AC1350

Reviews:

Related manuals for AC1350

Brands by name

Popular brands