TP active fun Spiro Spin TP750, Instructions For Assembly, Maintenance And Safe Use

Page: 7 / 20

TP750 Spiro Spin
7
USA
Warnings
WARNING!
THIS PRODUCT CONTAINS SMALL PARTS AND IS NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS.
SMALL PARTS ARE A CHOKING HAZARD.
WARNING! ONLY FOR DOMESTIC USE. FOR OUTDOOR USE.
WARNING!
THIS PRODUCT IS INTENDED FOR USE BY CHILDREN FROM AGES 3 TO 8 YEARS.
WARNING! MAXIMUM USER WEIGHT PER SEAT 35KGS. 2 USERS MAXIMUM. 1 PER SEAT ONLY.
MAXIMUM FALL HEIGHT – 24 INCH (609mm)
WARNING!
CHILDREN MUST BE DRESSED WITH WELL FITTING AND FULL FOOT ENCLOSING FOOTWEAR.
(EXAMPLE OF INAPPROPRIATE FOOTWEAR ARE CLOGS, FLIP-FLOPS AND SANDALS).
Important advice for assembly, maintenance
and safe use
1. Toys must be assembled by an adult before use exactly in
accordance with the instructions.
2. Check all parts are present before you start to assemble the
product.
3. Place small parts on a tray or similar, to ensure they are not lost.
4. Anchors supplied with this product must be fitted before use.
5. If any parts are missing do not use the product until the
replacement parts are fitted.
6. Remove all packaging before giving to your children or allowing
them to play with this product.
7. Ensure your product is sited on level ground. Failure to do this may
put additional stress on connections and joints and in time could
cause them to fail.
8. Ensure your product is located on a soft impact surface like grass.
Never locate your product on hard surfaces like concrete or
asphalt.
9. Avoid locating this product in full sun.
10. Children must not use this product until properly installed.
11. Adult supervision is required at all times to ensure children play
safely. Ensure children’s clothing is appropriate for the play activity.
12. Equipment should be checked by an adult at the beginning of
each season and at regular intervals during the usage season to
ensure it is safe. This includes but not limited to checking all nuts
& bolts for tightness and tighten when necessary.
13. Regularly oil all metallic moving parts.
14. Pay special attention to all connections and fastenings.
15 Parts may need to be replaced if they show signs of wear and
tear. Replace any defective parts in accordance with these
instructions.
16. Any changes to this toy, e.g. changing or adding an accessory,
must be done in accordance with our instructions. Failure to do
this will render your guarantee null and void and may make your
product unsafe.
17. The age recommendation for this product is clearly stated on the
packaging and these instructions. Please adhere to it at all times.
18. When you dispose of this equipment please do so responsibly.
200cm
200cm
200cm
250cm
Safe play free space area
This product requires a level ground surface of 210cm x 210cm
for a Safe Play Area.
The Safe Play Area refers to the zone extending 200cm beyond
the toy on all sides, including the space above the toy. The Safe
Play Area must be free from all structures, landscaping, trees
and branches, rocks, wires, sprinkler heads and other similar
obstacles to safe play. Children can be seriously injured running
or colliding into such obstacles.
CONSUMER INFORMATION SHEET FOR
PLAYGROUND SURFACING MATERIALS
The U.S. Consumer Product Safety Commission (CPSC) estimates that
about 100 000 playground equipment related injuries resulting from falls
to the ground surface are treated annually in U.S. hospital emergency
rooms. Injuries involving this hazard pattern tend to be among the
most serious of all playground injuries, and have the potential to be
fatal, particularly when the injury is to the head. The surface under and
around playground equipment can be a major factor in determining the
injury-causing potential of a fall. It is self evident that a fall onto a shock
absorbing surface is less likely to cause a serious injury than a fall onto a
hard surface.
Playground equipment should never be placed on hard surfaces such
as concrete or asphalt and while grass may appear to be acceptable it
may quickly turn to hard packed earth in areas of high traffic. Shredded
bark mulch, wood chips, fine sand or fine gravel are considered to be
acceptable shock absorbing surfaces when installed and maintained at a
sufficient depth under and around playground equipment.
X3.1 Select Protective Surfacing - One of the most important things you
can do to reduce the likelihood of serious head injuries is to install shock-
absorbing protective surfacing under and around your play equipment.
The protective surfacing should be applied to a depth that is suitable
for the equipment height in accordance with ASTM Specification F 1292.
There are different types of surfacing to choose from; whichever product
you select, follow these guidelines:
X3.1.1 Loose-Fill Materials:
X3.1.1.1
Maintain a minimum depth of 9 inches of loose fill materials
such as wood mulch/chips, engineered wood fiber (EWF), or shredded/
recycled rubber mulch for equipment up to 8 feet high; and 9 inches of
sand or pea gravel for equipment up to 5 feet high. NOTE: An initial fill
level of 12 inches will compress to about a 9- inch depth of surfacing over
time. The surfacing will also compact, displace, and settle, and should be
periodically refilled to maintain at least a 9-inch depth.
USA
USA
TP750 Spiro Spin IM In0750-B 25.01.18 MULTI.indd 7 25/01/2018 15:28