Toyotomi STG-909R32, User Manual, Page: 14 / 140

14
GB
 When unit is on Cooling mode, press MENU button and then press buttons  ,  ,  ,  to choose COSY
indication that flashes on remote controller’s screen. Press button OK to activate or deactivate the comfortable
wind to the user.
 When COSY mode is activated, fan speed is set to Auto and swing function will be cancelled. During COSY
function, the operations that turns off the unit, change running mode and activate SLEEP function, FAN speed
and SWING mode, deactivates automatically COSY function and resume the initial running mode.
19. HUMI FUNCTION
Press MENU button and then press buttons

,

,

,

to choose HUMI indication that flashes on remote controller’s
screen. Press button OK to activate or deactivate humidification mode.
Note: Humidifying mode is not available during dehumidification mode.
20. iCLEAN FUNCTION
 Air conditioner will automatically clean dust from the evaporator and will dry the moisture.
 When unit is OFF, press MENU button and then press buttons

,

,

,

to choose iCLEAN indication that
flashes on remote controller’s screen. Press button OK to activate or deactivate AUTOCLEAN function.
 AUTOCLEAN function stops automatically after 30 minutes.
21. CHILD-LOCK FUNCTION
 Press simultaneously buttons HEAT and MODE for at least 3 seconds, to activate or deactivate LOCK function.
 When LOCK function is activated, indication will appear on remote controll screen.
** Functions L/R SWING, ELE.H, LIGHT, COSY, HUMI are not available.
Insert Batteries to remote controller
1. Slide downwards the cover, as it shows the arrow in the first picture, to open it.
2. Insert two new batteries (7#). Make sure that you placed the batteries to correct electric poles (+&-).
3. Slide upwards the cover, as it shows the arrow in the third picture, to close it.
ATTENTION

In case below phenomenon occurs, please turn off the air conditioner and disconnect power
immediately. Then contact the authorized service for proper repair.
 Power cord is overheated or damaged.
 There is abnormal sound during operation.
 Air switch trips off frequently.
 Air conditioner gives off burning smell.
 Indoor unit is leaking.

Do not repair or reinstall by yourself the air conditioner.
8. BUTTON MENU/OK
Press this button to enter the ECO, HEALTH, SLEEP modes. Press

,

,

,

buttons to choose the function you
want. To confirm this function press button ΟΚ.
Note: Through MENU button, by pressing buttons

,

,

,

you will see the sign of desired function flashing on
remote controller’s screen. Then you can set this function.
9. BUTTON L/R SWING
Press this button to activate vertical louvers (left/right swing). Press it again to fix the desired swing position.
10. BUTTON U/D SWING
Press this button to activate horizontal louver (up/down). Press it again to fix the desired swing position.
Note: When air conditioner is ON, press and hold this button for 3 seconds. In this way you activate the rated
swinging. Press it again to fix the desired swing position.
11. HEALTH FUNCTION
When the unit is on, press button MENU and then buttons  ,  ,  ,  to choose HEALTH indication that flashes on
remote controller’s screen. Press button ΟΚ to activate or deactivate Ionizer HEALTH.
12. ECO FUNCTION
 During Cooling mode, air conditioner can enter in ECO mode. During ECO mode the air conditioner sets
automatically proper room temperature with the lowest power consumption. Air conditioner can work under ECO
mode up to 8 hours. After 8 hours ECO function will be deactivated.
 ECO mode will be cancelled if you change working mode or if you deactivate the remote controller.
 During Cooling mode, press MENU button and then press

,

,

,

buttons to choose ECO indication that
flashes on remote controller’s screen. Press button OK to activate or deactivate energy saving ECO function.
Note: Power consumption is affected by ambient (not set temperature) and house structure. When ambient
temperature is high or the house is very big with big losses (e.g. very high ceiling, old windows etc), use ECO mode
with caution.
13. SLEEP FUNCTION
 When unit is ON, press MENU button and then press buttons  ,  ,  ,  to choose SLEEP indication that
flashes on remote controller’s screen. Press button OK to activate or deactivate SLEEP mode.
 After 10 hours under SLEEP mode, SLEEP mode stops, and the air conditioner will continue under the initial
function.
Note: SLEEP function cannot be activated during FAN and AUTO modes. During SLEEP mode, there are no indications
on indoor unit.
14. SILENCE FUNCTION
When unit is ON, press MENU button and then press buttons

,

,

,

to choose SILENCE indication that flashes
on remote controller’s screen. Press button OK to activate or deactivate SILENCE mode.
15. ELE-H FUNCTION
When unit is ON, press MENU button and then press  ,  ,  ,  to choose ELE.H indication that flashes on remote
controller’s screen. Press button OK to activate or deactivate the auxiliary heating function.
16. DISPLAY FUNCTION
Press MENU button and then press buttons

,

,

,

to choose DISPLAY H indication that flashes on remote
controller’s screen. Press button OK to activate or deactivate mode indications that lights on indoor unit during
operation. This function is suitable especially during night.
17. LIGHT FUNTION
 Air conditioner will activate or deactivate automatically mode indications that lights on indoor unit during operation
based on ambient brightness.
 When unit is ON, press MODE button and then press buttons

,

,

,

to choose LIGHT indication that
flashes on remote controller’s screen. Press button OK to activate or deactivate LIGHT function.
18. COSY FUNCTION