Toyotomi FS1060A, Service Manual

Page: 20 / 28

Operating Procedures / Photos
7.Disassemble axial blade
Disboard the nut on blade with wrench and then
remove the blade.
8.Disassemble outdoor motor
Unscrew 4 tapping screws used for fixing the motor
pull out the leading wire and remove the motor.
Unscrew 2 tapping screws used for fixing the motor
support, lift it upward and then remove the motor
support.
9. Disassemble four-way valve
Unscrew the fixing nut of the four-way valve coil and
remove the coil. Wrap the four-way valve with
wet cotton and unsolder the 4 weld spots connecting
the four-way valve to take it out. Welding process
should be as quick as possible and keep wrapping
cotton wet all the time. Be sure not to burn out the
leading wire of compressor.
nut
nut
motor
fix screw for motor
motor support
fxing screw
four-way valve