Toyota Venza 2021, Manual

Page: 119 / 548

118
2-1. Instrument cluster
through sunglasses, especially
polarized sunglasses. Adjust the
brightness of the head-up display or
remove your sunglasses.
■ Street name display
Only street names which are
included in the map data will be dis-
played.
Select the “HUD” on the
screen of the multi-information
display. (

P.111)
■
Enabling/disabling the
head-up display
The head-up display enabled
and disabled with each press of
the
of the meter control
switches.
■
Changing settings of the
head-up display
The following settings can be
changed pressing and hold of
the
of the meter control
switches.
 Brightness and vertical posi-
tion of the head-up display
Select to adjust the brightness or
vertical position of the head-up dis-
play.
 Tachometer Settings
Select to display the blank, Hybrid
System Indicator or tachometer.
 Display content
Select to enable/disable the follow-
ing items:
• Navigation display (if equipped)
• Driving Assist display
*
WARNING
■ When using the head-up dis-
play
● Check that the position and
brightness of the head-up dis-
play image does not interfere
with safe driving. Incorrect
adjustment of the image’s posi-
tion or brightness may obstruct
the driver’s view and lead to an
accident, resulting in death or
serious injury.
● Do not continuously look at the
head-up display while driving as
you may fail to see pedestrians,
objects on the road, etc. ahead
of the vehicle.
NOTICE
■ Head-up display projector
● Do not place any drinks near
the head-up display projector. If
the projector gets wet, electrical
malfunctions may result.
● Do not place anything on or put
stickers onto the head-up dis-
play projector.
Doing so could interrupt head-
up display indications.
● Do not touch the inside of the
head-up display projector or
thrust sharp edges or the like
into the projector.
Doing so could cause mechani-
cal malfunctions.
Using the head-up display