manualshive.com logo in svg

Toyota Venza 2014, Owner'S Manual

Share
Download
Toyota Venza 2014 Owner'S Manual Download Page 280

280

2-5. Driving information

VENZA_OM_OM73019U_(U)

■

Maintenance

●

If you tow a trailer, your vehicle will require more frequent maintenance
due to the additional load. (See “Scheduled Maintenance Guide” or
“Owner’s Manual Supplement”.)

●

Retighten the fixing bolts of the towing ball and bracket after approxi-
mately 600 miles (1000 km) of trailer towing.

■

If trailer sway occurs

One or more factors (crosswinds, passing vehicles, rough roads, etc.) can
adversely affect handling of your vehicle and trailer, causing instability.

●

If trailer swaying occurs:

• Firmly grip the steering wheel. Steer straight ahead. 

Do not try to control trailer swaying by turning the steering wheel.

• Begin releasing the accelerator pedal immediately but very gradually to

reduce speed. 
Do not increase speed. Do not apply vehicle brakes.

If you make no extreme correction with the steering or brakes, your vehicle
and trailer should stabilize.

●

After the trailer swaying has stopped:

• Stop in a safe place. Get all occupants out of the vehicle.
• Check the tires of the vehicle and the trailer.
• Check the load in the trailer. 

Make sure the load has not shifted. 
Make sure the tongue weight is appropriate, if possible.

• Check the load in the vehicle. 

Make sure the vehicle is not overloaded after occupants get in.

If you cannot find any problems, the speed at which trailer swaying occurred
is beyond the limit of your particular vehicle-trailer combination. 
Drive at a lower speed to prevent instability. Remember that swaying of the
towing vehicle-trailer increases as speed increases.

Summary of Contents for Venza 2014





















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands