manualshive.com logo in svg

Toyota Venza 2014, Owner'S Manual

Share
Download
Toyota Venza 2014 Owner'S Manual Download Page 102

102

1-4. Opening and closing the windows and moon roof

VENZA_OM_OM73019U_(U)

■

When the moon roof does not close normally

Perform the following procedure:

Stop the vehicle.

Open the moon roof halfway.

Press and hold the open/close switch in the close position.
When the moon roof reaches the full close position, maintain the
open/close switch in the close position for more than 2 seconds.
It will adjust slightly and then stop.

To ensure the initialization is complete, make sure opening, closing,
tilting up and down functions work properly.

If the moon roof does not fully close even after performing the above proce-
dure correctly, have the vehicle inspected by your Toyota dealer.

CAUTION

■

Opening the moon roof

Observe the following precautions.
Failing to do so may cause death or serious injury.

●

Do not allow any passengers to put their hands or heads outside the vehi-
cle while it is moving.

●

Do not sit on top of the moon roof.

■

Closing the moon roof

Observe the following precautions. 
Failing to do so may result in death or serious injury.

●

Check to make sure that all passengers do not have any part of their bod-
ies in a position where they could be caught when the moon roof is being
operated. 

●

Do not allow children to operate the moon roof. 
Closing the moon roof on someone can cause death or serious injury.

STEP

1

STEP

2

STEP

3

STEP

4

Summary of Contents for Venza 2014





















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands