manualshive.com logo in svg

Toyota URBAN CRUISER, Owner'S Manual

Share
Download
Toyota URBAN CRUISER Owner'S Manual Download Page 345

345

3-6. Other interior features

3

Interior fe

atures

URBAN CRUISER_OM_OM52C63E_(EE)

CAUTION

Observe the following precautions. 
Failure to do so may cause the driver’s floor mat to slip, possibly interfering
with the pedals while driving. An unexpectedly high speed may result or it may
become difficult to stop the vehicle, leading to a serious accident.

When installing the driver’s floor mat 

Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.

Only use floor mats designed for the driver’s seat.

Always install the floor mat securely using the retaining hooks (clips) pro-
vided.

Do not use two or more floor mats on top of each other.

Do not place the floor mat bottom-side up or upside-down.

Before driving

Check that the floor mat is securely
fixed in the correct place with all the
provided retaining hooks (clips). Be
especially careful to perform this check
after cleaning the floor.

With the engine stopped and the shift
lever in “N”, fully depress each pedal to
the floor to make sure it does not inter-
fere with the floor mat.

Summary of Contents for URBAN CRUISER

































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands