manualshive.com logo in svg

Toyota URBAN CRUISER, Owner'S Manual

Share
Download
Toyota URBAN CRUISER Owner'S Manual Download Page 135

135

1-7. Safety information

1

Be
fo

re

 d

riv

in

g

URBAN CRUISER_OM_OM52C63E_(EE)

CAUTION

SRS airbag precautions

The SRS front passenger airbag also deploys with considerable force, and
can cause death or serious injury especially if the front passenger is very
close to the airbag. The front passenger seat should be as far from the air-
bag as possible with the seatback adjusted, so the front passenger sits
upright.

Improperly seated and/or restrained infants and children can be killed or
seriously injured by a deploying airbag. An infant or child who is too small
to use a seat belt should be properly secured using a child restraint sys-
tem. Toyota strongly recommends that all infants and children be placed in
the rear seats of the vehicle and properly restrained. The rear seats are
safer for infants and children than the front passenger seat. (

P. 143)

Do not sit on the edge of the seat or
lean against the dashboard.

Do not allow a child to stand in front of
the SRS front passenger airbag unit or
sit on the knees of a front passenger.

Do not allow the front seat occupants to
hold items on their knees.

Summary of Contents for URBAN CRUISER

































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands