(LHD) -
19
Setting Guide
TVSS IV-S
TEMPORARY OVERRIDE
The alarm system has a temporary override. It is possible to defeat the arming of the alarm system for maxi-
mum one hour.
PREPARATION
1)
Check that all connectors and terminals of the fitting kit wire harness (main) and (engine) are fitted cor-
rectly.
2)
Reconnect the negative battery cable.
3)
Close boot and bonnet completely.
4)
Remove the key from the ignition key cylinder and push the “
unlock
” button of the remote control.
Ë
Indicator lights will flash twice.
5)
Step in the vehicle and make sure that
all doors are closed
completely.
6)
Insert the key
into the ignition key cylinder.
OVERRIDE ON :
7)
Turn the
Ignition ON.
8)
Within 20 seconds from step 7) :
• Open and close the
driver’s door 7 times.
9)
Turn the
Ignition OFF.
Ë
Indicator lights will flash once.
Ë
LED will start flashing continuously.
OVERRIDE OFF :
the override will automatically be cancelled after 1 hour.
Ë
Indicator lights will flash once.
Ë
LED will stop flashing.
OVERRIDE OFF :
If you want to stop the override earlier :
10) Turn the
Ignition ON.
11) Within 20 seconds from step 10) :
• Open and close the
driver’s door 7 times.
12) Turn the
Ignition OFF.
Ë
Indicator lights will flash twice.
Ë
LED will stop flashing.
