(LHD) -
15
Setting Guide
TVSS IV-S
3)
PIEZO BUZZER DEFEAT : Door AJAR warning ON or OFF.
PREPARATION
1)
Check that all connectors and terminals of the fitting kit wire harnesses (main) and (engine)
are fitted correctly.
2) Reconnect the negative battery cable.
3) Remove the key from the ignition key cylinder and push the “
unlock
” button of the remote control.
Ë
Indicator lights will flash twice.
4)
Close boot and bonnet completely.
5)
Step in the vehicle and make sure that
all doors are closed
completely.
6)
Insert the key
into the ignition key cylinder.
7)
Wait
for more than
5 seconds.
8)
After turning the key to the
ACC
position, turn the key from the
ACC to the
ON position five times
(Last position : ON).
Ë
Status Monitor LED will illuminate for 30 seconds.
9)
While the LED is illuminated :
• Open and close the
driver’s door 3 times.
• Turn the key to the
ACC
position.
Ë
LED will illuminate for 30 seconds.
Ë
Indicator lights will flash
3 times.
Door AJAR warning OFF :
10) While the LED is illuminated:
• Open and close the
driver’s door 1 time.
• Turn the key
ACC-ON-ACC 1 time
(Last position : ACC).
Ë
Indicator lights will flash
once.
Ë
LED will extinguish.
Door AJAR warning ON :
10) While the LED is illuminated :
• Open and close the
driver’s door 2 times.
• Turn the key
ACC-ON-ACC 1 time
(Last position : ACC).
Ë
Indicator lights will flash
twice.
Ë
LED will extinguish.
ACC
ON
START
LOCK
