Toyota Tundra guide Manual Download Page 552

Page: 552 / 672

552

8-2. Steps to take in an emergency

■

When the tire pressure warning light comes on

Check the tire inflation pressure and adjust to the appropriate level. Push-

ing the tire pressure warning reset switch will not turn off the tire pressure

warning light.

■

The tire pressure warning light may come on due to natural causes

The tire pressure warning light may come on due to natural causes such

as natural air leaks and tire inflation pressure changes caused by tem-

perature. In this case, adjusting the tire inflation pressure will turn off the

warning light (after several minutes).

■

When a tire is replaced with a spare tire

The temporary spare tire is not equipped with a tire pressure warning

valve and transmitter. If a tire goes flat, the tire pressure warning light will

not turn off even though the flat tire has been replaced with the temporary

spare tire. Replace the temporary spare tire with the repaired tire and

adjust the tire inflation pressure. The tire pressure warning light will go off

after several minutes.

■

Conditions that the tire pressure warning system may not function
properly

→

P. 501

■

If the tire pressure warning light frequently comes on after blinking
for 1 minute

If the tire pressure warning light frequently comes on after blinking for 1

minute when the engine switch is turned to “ON” position, have it checked

by your Toyota dealer.

■

Warning buzzer

In some cases, the buzzer may not be heard because of noisy place or an
audio sound.

Summary of Contents for Tundra guide

































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tundra guide

Reviews:

Related manuals for Tundra guide

Brands by name

Popular brands

Toyota Tundra guide, Manual

Search results

Summary of Contents for Tundra guide

Reviews:

Related manuals for Tundra guide

Brands by name

Popular brands